You can use your voice to make a tune

You can make a music from your voice.

Connect a microphone with your computer.
Start the Easy Music Composer.
On the main menu, click File>New>4/4.
On the menu, point to settings, click "Microphone".


Push the button of "Record your voice" from the screen of "Input notes by microphon.




Sample music is the Alphabet song.
You have to sing a part of the song.
( / a b / c d / e f / g / h i / j k / l m n o / p )

Bring a microphone to the mouth, then click Record button.
Click inside the frame on the screen as soon as you begin to sing.
A click is for inputting a rhythm.
The position of click is the beginning of a bar.
Click "Stop button" when you finish singing.
You have to click 8 times in all.
Don't panic if you failed.
When you failed, click "Stop button" and sing a song from the beginning.
When you succeeded in recording, on the "Record your voice" menu, point to File, and then click Exit.

Push the button of "Edit your voice".


On the "Edit your voice" screen, click "Display the song's wave" button.


Click [>] button several times and look at the wave of your voice.
Record your voice again if your voice is too big or too small.
Click the "Listen to the song" button to listen to your song.
Record your voice again if your song is bad.
Click "Create the music data" button to connect your song and rhythm.
Click "Listen ... with rhythm" button and you can listen to your song with rhythm.
On the menu, point to File, and then click Exit.

Wave's volume is too small.


Wave's volume is good.


Wave's volume is too big.


Push the button of "Make a song".


Click triangle Playback button to listen to your song.
Making a music from your voice is not easy.
You will fail several times.
Try experiment to succeed.

---

To make a music from your voice, microphone must be connected to your computer.
You can use a music instrument instead of your voice.

You must input the timing of a rhythm.
You can input a rhythm by two method.
You can input a rhythm while singing by using mouse.
You have to click beginning of each bar.
Another method is to click the beginning of bars with the mouse while listening to your song that was recorded.
Input a rhythm from the beginning again if you failed.
You can decrease a rhythm later using "Decrease rhythm" button.
This means the song of bar 8 changes into bar 4.

Overview of "Edit your voice" screen.


(1) ["Display the song's wave" button and "<" ">" button.]
You can see the volume of your voice.

(2) [Octave check box]
You can select method of decision of note's octave.
To decide the octave of note is difficult because the voice has harmonics.
So you have to choose the one which goes well.

(3) [Sampling time check box]
You must select sampling time.
Sampling time of 0.05 sec is suited to a high-pitched tone.
Sampling time of 0.1 sec is suited to a low-pitched tone.

(4) [Slide bar of "Timing of click"]
It is due to the speed of a CPU that the timing of click differs.
You can adjust the timing of the click.
Value that you adjust is effective until next you adjust.

(5) [Slide bar of "Noise level"]
The program need decide which sound is your voice or noise.
You can make from small sound a note using a slide bar(Left).
You can make from small sound a noise using a slide bar(Right).

(6) [Listen to the song]
You can listen to your song without rhythm.

(7) [Listen ... with rhythm]
You can listen to your song containing rhythm.

(8) [Stop the song]
You can stop your song.

(9) [Create a music data]
You can create a music data.

(10) [Decrease rhythm]
You can decrease half number of rhythm.